Maintenance; Warranty - Selecta APL-54 Manual De Instrucciones

INSTRUCTIONS MANUAL
Fig. 8.5.9 Information screen
Fig. 8.5.9.1 Firmware update
J
.P. SELECTA s.a.u.
CODE 80390
8.5.9 Information. Firmware update.
The equipment is tested and checked before shipment but there may be
improvements in the control operation.
If it is necessary to update the firmware version, press the INFORMATION
option and Fig 8.5.9 appears.
Press the UPGR key and follow the instructions that appear on
the screen. A screen similar to Fig 8.5.9.1 will appear.
To obtain the file with the update, it is necessary to know the DEVICE ID
code that appears in screen Fig 8.5.9. Load this file into a USB memory
and insert it into the front connector.
Attention: during the update process DO NOT turn off the equipment or
remove the USB memory from the connector. The equipment could run
out of control.
The update process lasts a few minutes. During the update process the
control is turned off several times, but this is normal.
Press the BACK key to return to the settings menu or the HOME key to
return to the initial screen.

9. Maintenance

Before cleaning, disconnect the computer from the mains.
Do not spill liquids on the equipment.
CLEANING:
External parts of the equipment can be cleaned with a little alcohol and
water solution.To clean the different parts, it is advised to use:
Alcohol for cleaning of stainless steel.
Alcohol with cotton or a soft piece of cloth for cleaning plastic.

10. Warranty

This product is guaranteed for one year. The guarantee does not cover
damages caused by an incorrect use or causes beyond the control of
J.P. Selecta, s.a.u
Any manipulation of the equipment by personnel not authorized by J.P.
Selecta, s.a.u. automatically cancels the warranty.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - http://www.grupo-selecta.com
REV A
Tel 34 93 770 08 77 Fax 34 93 770 23 62
01/2021 Pag.: 28