Work Position; Automatic Shutdown Function - Husqvarna 325iLK Manual Del Usuario

Work position

• Hold the product with 2 hands.
• Hold the product on the right side of your body.
• Keep the cutting attachment below waist level.
• Keep body parts away from the hot surfaces.
• Keep body parts away from the cutting attachment.
Before you operate the product
• Examine the work area to make sure that you know
the type of terrain, the slope of the ground and if
there are obstacles such as stones, branches and
ditches.
• Do an overhaul inspection of the product.
• Do the safety inspections, maintenance and
servicing that are given in this manual.
• Make sure that all covers, guards, handles and
accessories are correctly attached and not
damaged.
To start the product
1. Push the power lever the start position.
2. Use the power trigger to control the speed.
To start the SavE function
The product has a power saving function. The SavE
function gives the longest operation time from the
battery.
1. Push the control lever to SavE symbol. The
maxspeed is now limited.
12
2. Push the Control lever to 1 or 0 to quit the SavE
function.

Automatic shutdown function

The product is equipped with a shutdown function that
deactivates the product if it is not used.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Push the power lever to the stop position.
3. Push the release buttons on the battery and pull the
battery out.
1386 - 002 - 04.12.2019