Hilti TE 76 / TE 76 P Manual De Instrucciones página 10

Technical data
Rated power
Nominal voltage
Nominal current input
Frequency
Weight of tool
Dimensions (l×h×w)
Minimum distance between wall and hole drilled
Speed
Typical drilling performance in medium-hard B35
concrete
Typical chiselling performance in medium-hard B35
concrete
TPS Theft Protection System
with Company Card, Company Remote and
TPS-K activation key
Main features of the tool
Electrical protection class I (grounded)
Active Torque Control TE76-ATC / TE76P-ATC
(additional operator protection in drilling mode)
Mechanical torque-limiting clutch
No-load hammering absorption
Grip and side handle with vibration absorption
Quick-change chuck
TE-Y insert tool system
Infinitely variable speed, with electronic regulation
independent of load
Selector switch for full power (II) and half power (I)
Drilling and chiseling modes
Control switch lockable in chiseling mode
The tool is designed for the following uses:
Use
Drilling in concrete, masonry
and natural stones
Chiseling in concrete, masonry
and natural stone
Setting anchors
Drilling in wood and metal
Mixing non-flammable
materials, e.g. grout
4
Printed: 07.07.2013 | Doc-Nr: PUB / 5071196 / 000 / 00
TE 76 / TE 76-ATC
1300 W
120 V
13.0 A
50–60 Hz
TE 76 / TE 76P
TE 76-ATC / TE 76P-ATC
TE 76 / TE 76P
497x 261x 115mm (19.6 x 10.3 x 4.5 in)
TE 76-ATC / TE 76P-ATC
510 x 288 x 115 mm (19.6 x 10.3 x 4.5 in)
1.5 in / 38 mm
II = 0–282
3 /
1 "
1
35.1 cu.in/min / 575 cm
option TE 76P / TE 76P-ATC
24-way chisel position adjustment
Gearing and hammering mechanism with oil
lubrication
Automatic cut-out carbon brushes
Service indicator with light signal
Pivotable side handle
Depth gauge attachment (optional)
Theft protection system (option TE 76P / TE 76P-ATC)
The tool may be equipped with the optional theft pro-
tection system. If the tool is equipped with this feature,
it can be activated and made ready for operation only by
way of the corresponding activation key.
Right of technical changes reserved
Required insert tools
Drill bit with TE-Y connection end Drilling range in concrete
– Hammer drill bits
– Breach bits
– Percussion core bits
Pointed, flat and shaped chisels
with TE-Y connection ends
Setting tools with TE-Y
connection ends
Chuck holder, item 263359
Keyless chuck, item 60208
Wood drill bits and metal drill bits Wood drill bits,
with smooth or hex. shank
Chuck holder, item 263359
Keyless chuck, item 60208
Mixing tools with smooth or
hex. shank
I = 0–200 r.p.m.
"
dia.: 14.2 in/min / 20 mm dia.: 360 mm/min
4
dia.: 11.4 in/min / 25 mm dia.: 290 mm/min
"
1 / dia.: 7.1 in/min / 32 mm dia.: 180 mm/min
4
3 /min
Working range
"– 1 " dia. / 12– 40 mm dia.
1 / 9 /
2 16
"– 3 " dia. / 40– 80 mm dia.
1 1 / 1 /
2 8
"– 6"
1 3 / dia. / 45–150 mm dia.
4
Surface finishing and breaches
All Hilti anchors with TE-Y setting tools
Metal drill bits,
Mixing tools,
"– 6" dia. / 80–150 mm dia.
3 1 /
8
TE 76P / TE 76P-ATC
1400 W
120 V
13.9 A
7.0 kg (15.0 Ib)
7.9 kg (17.5 Ib)
"– 1 " dia. / 10–32 dia.
3 / 1 /
8 4
" – " dia. / 10–20 dia.
3 / 3 /
8 4