Assembly Instruction; Important - Trueshopping SFBVOOB5SA Manual De Instrucciones

Soplador inalámbrico de iones
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTIONS
INSTALLING THE BLOWER TUBE
CAUTION: Always ensure that the tool is switched off and the battery is removed before making any
adjustments or maintenance procedures.
➢ Slide the small tube (C) over the big tube (B) until the latch on the big tube is inserted into the end of
the opening on the small tube and locks into position (see fig.1)
➢ Align the widest end of the big tube (B) with the front opening on the blower (A). (see fig 2)
B
Fig. 1
C
Fig. 2
B
A
Fig. 1
Fig. 2
CONNECTING AND REMOVING BATTERY

IMPORTANT!

The battery pack is not charged when it is purchased. Before using the blower for the first time, place the
battery pack in the battery charger and charge. Make sure to read all safety precautions, and follow the
instructions in the battery charger section.
To remove the battery pack
➢ Press the button (1) of battery door, then open it (see fig.3)
➢ Press the battery release button (2) at the back of the battery pack (see fig 4)
➢ Slide the battery pack backward, and then pull or lift the battery out of the tool (see fig 5).
1
2
Fig. 5
Fig. 4
Fig. 3
To install the battery pack
To install the battery pack into the tool, align the rails of the battery pack with the rails in the tool and push
the battery into the housing. To connect the battery, slide the battery pack fully forward. Until the latch
locks into place.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido