Tools Needed - SRAM ROCK SHOX Manual Del Usuario

English
To ensure that your seatpost performs properly and to help make your riding experience more
enjoyable and trouble-free, we highly recommend that you have it installed and serviced by
a qualified bicycle mechanic. We also highly recommend wearing your safety glasses every
time you install and/or service your bicycle components.
Important: DO NOT attempt to adjust air pressure using the air valve located at the bottom
of the seatpost. Any change in the factory air pressure setting will render the seatpost
inoperable, requiring full service.
COMPATIBILITY
• RockShox seatposts are compatible with saddles with 7 mm rail diameters and are
designed for use with 30.9 mm, 31.6 mm, and 34.9 mm seat tube internal diameters.
• Seatpost and seat tube diameters must be the same. RockShox seatpost diameters are
printed on the products.
Important: Do not use a reduction sleeve to alter the seat tube diameter.

TOOLS NEEDED

• Safety glasses
• 4 mm hex wrench
®
• T25 TORX wrench
• Torque wrench
RECOMMENDED SERVICE INTERVALS
• Remote and hose bleed - after 100 hours of riding
(click to watch - Reverb remote system bleed video)
• Keys, topcap seals, and seal head seal replacement - after 100 hours of riding
(click to watch - Reverb seatpost seal video)
• Complete seatpost overhaul - after 200 hours of riding
(click to watch - Reverb seatpost service videos)
2
IMPORTANT
• Friction paste
• Isopropyl alcohol
• Clean, lint free rag
TORX ® is a registered trademark of Acument Intellectual Properties, LLC
Reverb User Manual
95-4215-005-000 Rev B