User's Manual - Vents Z Instrucciones De Uso

Read this manual carefully before mounting the unit.
Compliance with the manual instructions ensures the reliable service of the device
EN
during all the service life period. Keep this manual available for the whole period
of the service life as it contains servicing and maintenance requirements.
Z, VITRO, Z star and VITRO star axial fans are designed
for exhaust ventilation of small and medium sized residential
and commercial premises heated during winter time.
The fans are made of white plastic.
The front panel is available in stainless steel or glass
modifications.
Delivery list includes:
Fan: 1 pce.;
Screws and dowels: 4pcs;
User's manual: 1pce.;
Packing box.
The fans are designed for connection to 100, 125 and 150 mm
diameter round ducts.
The typical installation options are shown in fig. 1-2.
TURBO model is equipped with high-powered motor.
Z star, Z star TH , VITRO star, VITRO star TH models
are equipped with LED lamp.
VITRO model is equipped with a glass face panel.
L model is equipped with motor ball bearings.
12 model is equipped with 12V, 50 Hz motor.
T model is equipped with run-out timer with the operating
time ranging between 2 and 30 min.
TH model is equipped with humidity sensor with the operating
range between 60% and 90%.
Fan design is regularly being improved, so some models
can slightly differ from those ones described in this manual.
The fans can be mounted by means of four screws and
dowels (fig.1) to the wall, inside the ventilation shaft or
round air duct.
The mounting sequence of Z and VITRO fan models is
shown is shown in fig. 2-13, Z star and VITRO star model -
in fig. 20-31, Z star TH and VITRO star TH model is shown
in fig. 41-55.
Wiring diagram for Z and VITRO fan modification is shown
in fig. 10. The wiring diagrams for Z star and VITRO star fan
modifications are shown in fig. 28 and show both joint
connection of the fan and the lamp through one switch and
separate connection the fans and the lamp through two
switches. The wiring diagram for Z star TH and
VITRO star TH fan modifications is shown in fig. 50.
The fans are designed for connecting to single-phase
AC 220-240V at 50 Hz or 12V at 50 Hz power supply network.
Protection rating from access to dangerous parts and
water penetration:
IP X4 for Z and VITRO models
IP 24 for Z star and VITRO star models
IP 24 for Z star TH and VITRO star TH models
Clean the fan surfaces periodically from dust and dirt
(fig. 14-19 for Z and VITRO model, fig. 32-40 for Z star and
VITRO star model, fig. 56-61 for Z star TH and VITRO star
TH model).
Clean the fan with detergent and water solution using a
soft cloth.
Avoid water splashes on the electric motor.
After cleaning wipe the surfaces dry.
2