Appendix; Corrective Action - Maytronics Dolphin Service Kit Manual De Usuario

6. APPENDIX

Fault Codes and Action Items
Fault Code Fault Description
1
DC in voltage
2
Out of water
3
Impeller overload (1)
4
Impeller underload (1)
7, 9
Drive overload (1, 2)
8, 10
Drive underload (1, 2)
11, 13
Wall/floor sensor (1,2)
17, 18
Impeller motor failure (1,2)
19, 20
Drive 1,2 motor failure
21
Servo underload
22
Servo overload
23-33
Card fail,
Servo Motor Driver failure
34
Technician stamp
10

Corrective Action

There is a supply problem or current short.
Check that the impeller is not broken
or replace the impeller motor or whole motor unit.
Check that there are no objects stuck in the impeller
and that the impeller is not broken.
Check that the impeller is not broken
or replace the impeller motor or whole motor unit.
Check the drive system elements and confirm that
there are no objects stuck in the drive system,
or replace the drive motor or the whole motor unit.
Check the drive system elements or check that the
connector is not broken
or replace the drive motor or whole motor unit.
Check if there are any obstacles in the pool that disturb
the Dolphin's functionality.
If not, then replace the card or the whole motor unit.
Replace the impeller motor or whole motor unit.
Replace the drive motor or the whole motor unit.
Replace the motor or the whole motor unit.
Check that there are no objects stuck in the servo arm,
or replace the motor or whole motor unit.
Check that the connector is not broken, or replace the
card or the whole motor unit.
This signature indicates that the technician took care of
all failures were until signing.
Dolphin Service Kit
| User Instructions