Step 8
Fasten six METAL BRACKETS (4G) to the ENDS (A and B), UPRIGHTS (C and D), and BOTTOMS (G). Use six
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the BRACKETS are even with the edges of the ENDS, UPRIGHTS, and BOTTOMS.
å
Fasten the BASES (O) to the ENDS (A and B), UPRIGHTS (C and D), and BOTTOMS (G). Use six BLACK 9/16" LARGE
å
HEAD SCREWS (1S) through the METAL BRACKETS on the ENDS, UPRIGHTS, and BOTTOMS and into the BASES.
Curved edge
O
G
4G
www.sauder.com/services
B
D
4G
(6 used)
4G
BLACK 9/16" LARGE HEAD SCREW
(12 used in this step)
Curved edge
O
G
418270
1S
C
A
Page 13