Master audio XCELLENCE Serie Manual De Usario página 43

Amate Electroacústica,s.l.
4.3. Connection Panel
Each unit contains a rear panel comprising:
A) RJ45 INPUT: Computer connection input.
B) RJ45 LINK: Computer signal link.
C) INPUT SIGNAL: XLR balanced signal connector.
1= Shield 2= Live
D) LINK INPUT SIGNAL: XLR connector for parallel connection of various cabinets
with the same input signal.
1= Shield 2= Live
E) AC INPUT: Mains supply via PowerCon.
F) AC LINK: Power link for PowerCon connector to feed other units in parallel (up to
a maximum of 1 extra unit).
G) AC INDICATORS
ON: lights up with correct AC signal.
STAND BY: lights up during switch on sequence.
OVERVOLTAGE PROTECTION: lights up if the AC input signal exceeds 250VAC.
The system shuts down automatically and cannot be connected until the AC level is
correct. This protects against erroneous connection to 400V or neutral voltage drop.
E G
F
Fig.11. X-18W connection panel
Always use mains power cable supplied by manufacturer.
Never connect the X-18W to an unearthed mains supply or by using an
unearthed mains cable.
Xcellence Series.Ver 1.0
3= Return
3= Return
A B C D
Mar 09
43