Parallel Connection - Master audio XCELLENCE Serie Manual De Usario

Amate Electroacústica,s.l.
5.CONNECTING

5.1. Parallel connection

Connect the signal (mixing desk output) to INPUT on the first unit. Use the LINK
output to transfer the INPUT signal to the second unit and thus sequentially for further
units. All of the units in this chain must be switched on.
For the mains connection in parallel use the cable with grey Neutrik PowerCon
NAC3FCB at one end and the blue Neutrik PowerCon NAC3FCA at the other end.
Do not connect more than 4 X-12C or X-15C units using the AC Stacking
output connector.
Do not connect Xcellence series units in parallel using PowerCon-
PowerCon without earth.
Fig.12. Parallel connection for the Xcellence series(signal)
Xcellence Series.Ver 1.0 Mar 09
44