Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Measure across 25.25 in. (Critical Dimension) from plumb line & mark
location.
6.
Mark a plumb line on the wall down 72 in. from shelf.
Level across & mark the 3 in., 35 in. & 67.5 in. locations on line.
7.
8.
At the 3 in., 35 in. & 67.5 in. marks, center the middle hole of the tower
bracket & mark bracket hole locations (bracket flanges are positioned
towards tower inside).
9.
Secure tower bracket to wall using #8 1 1/2 in. screws.
10. Repeat at all bracket locations.
5
11. Position tower sides with grooves facing up.
12. Locate cam bolt positions at bottom of tower sides.
13. Secure cam bolt into pre-pilot hole at location.
14. Repeat for 2nd location & 2nd tower side.
15. Select tower bottom shelf (typically the logo shelf).
16. Insert cam nut with arrow facing toward bolt hole.
17. Repeat for each location.
Publicidad
Tabla de contenido
