John Louis Home JLH-525 Instrucciones De Ensamblaje página 9

21. Repeat steps for additional secondary shelf.
STEP 6 - Installing Angle Brackets
16 in. Angle Bracket used with 16 in. deep Deluxe Organizer
1. Measure 3 in. back from front of angle bracket & mark location.
2. Place J-hook snug with underside of bracket & align the front edge of the
J-hook with the mark.
3. Secure using #8 1 in. screws.
4. Repeat for each angle bracket & J-hook.
12 in. Angle Bracket used with 12 in. deep Premier Organizer
On the 12 in. angle bracket install it is recommended to pre-pilot screw
hole locations with a 1/8 in. drill bit prior to securing the J-hook to the
angle bracket.
1. Place J-hook snug with underside of bracket & flush the front edge of the
J-hook with the front of the angle bracket.
2. Secure using #8 1 in. screws.
3. Repeat for each angle bracket & J-hook.
4. Insert #8 3 in. screw into angle bracket.
5. Position angle bracket 6 in. or 4 slats in from shelf end (bracket may be
positioned in your desired location).
6. Ensure bracket is square with shelf underside & back wall.
7. If no stud is present, mark hole location by driving screw into drywall.
8. Install anchor if necessary.
9. Secure angle bracket using #8 3 in. screw.
10. Repeat for 2nd angle bracket.
11. Repeat for all shelf locations.
8