MODEL 4924
OPERATION
(Figure 1)
Due to the high velocity of air generated by this Fan, hearing the sound of the air
is normal. For quieter operation, use low speed.
1. Remove the Fan from the carton.
2. Place the Fan on a firm, level surface.
WARNING:
Plastic or rubber tabs, like the feet on this unit, may stick to hardwood
floors. The unit may leave a residue that could darken, stain or leave permanent blem-
ishes on the finish of certain hardwood floors.
3. Plug the cord set into a 120 V~ electrical outlet. Be sure plug fits tightly in outlet. A
loose fit may cause overheating and damage the plug.
4. Turn the Fan ON by turning the Power/Speed Knob.
5. Set the Fan to the desired speed.
3 - High Speed
2 - Medium Speed
1 - Low Speed
6. The oscillation function will operate in any speed mode. Press the Oscillation
Button ( ) to turn this function on. Press it once more to turn this function off.
7. To turn the Fan OFF, turn the Power/Speed Knob to OFF (0) and unplug the unit
from the electrical outlet.
MAINTENANCE
WARNING:
ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.
WARNING:
DO NOT IMMERSE FAN IN WATER!
CLEANING: Clean the Fan intake and exhaust openings with the vacuum brush attachment on your vacuum cleaner. This will remove dirt and
lint that may accumulate over time. DO NOT ATTEMPT TO TAKE APART FAN. Clean the body of the Fan with a soft cloth.
CAUTION:
Do not use gasoline, benzine, thinner, harsh cleaners, etc. as they may damage the Fan. NEVER use ALCOHOL OR SOL-
VENTS.
STORAGE: Store the Fan, with these instructions, in the original carton in a cool, dry place.
LIMITED WARRANTY - NOT VALID IN MEXICO
SHOULD ACCESSORY PARTS BE NEEDED, CONTACT THE MANUFACTURER FOR IN-WARRANTY REPLACEMENT PARTS.
A COPY OF PROOF-OF-PURCHASE MUST BE INCLUDED ALONG WITH THE TYPE AND STYLE, WHICH IS LOCATED ON THE
BOTTOM OF YOUR APPLIANCE.
This product is warranted for one year from the date of original purchase against defects in workmanship and/or materials. At our option,
parts that prove to be defective will either be repaired or replaced or the whole product will be replaced.
Should electrical or mechanical repair become necessary during the warranty period, send your complete product, postage or freight
pre-paid to the nearest service center. Call the number below for the service station nearest you.
Should a part need replacement, you must give us the type and style of your appliance. You will find this at the bottom of the appliance.
In either case, a copy of your proof of purchase is requested.
This warranty does not apply if the damage occurs because of accident, improper handling or operation, shipping damage, abuse,
misuse, unauthorized repairs made or attempted, or the use of the product for commercial service.
ALL WARRANTIES, EXPRESSED OR IMPLIED, LAST FOR ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. THIS
WARRANTY DOES NOT COVER LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY CAUSE WHATSOEVER.
Some states do not allow limitations on how long any implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so that the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights. You may also
have other rights which vary from state to state.
.
.
Rev. A 9/04
Power/Speed
Knob
Oscillation
Button
Figure 1
2
INSTRUCCIONES IMPORTANTES -
MANUAL DE USO
LEA Y GUARDE ESTAS INSTRUCCIONES
LEA CUIDADOSAMENTE LAS INSTRUCCIONES ANTES DE INTENTAR ARMAR, INSTALAR, USAR O DAR
PROTÉJASE A SÍ MISMO Y A LOS DEMÁS CUMPLIENDO CON TODA LA INFORMACIÓN DE SEGURIDAD. EL NO
SEGUIR LAS INSTRUCCIONES PODRÍA RESULTAR EN LESIONES PERSONALES Y/O DAÑOS A LA PROPIEDAD.
CONSERVE LAS INSTRUCCIONES COMO FUTURA REFERENCIA.
Este Ventilador es para uso residencial únicamente.
No está destinado para uso en ambientes comerciales o industriales.
INFORMACIÓN GENERAL DE SEGURIDAD
Al usar aparatos eléctricos, las precauciones básicas de seguridad deberan
siempre de seguirse para reducir el riesgo de incendio, choque eléctrico, y
daño a personas, incluyenda las siguientes:
1. Lea todas las instrucciones antes de utilizar el Ventilador.
2. Cerciórese de que la fuente de poder sea compatible con las
demandas eléctricas del Ventilador.
3. Use este Ventilador sólo en la forma que se describe en el manual.
Cualquier otro uso no recomendado por el fabricante podría
ocasionar un incendio, golpes de electricidad o lesiones a personas.
4. Para disminuir el riesgo de lesiones físicas y golpes de
electricidad, no debe jugarse con el ventilador no deberá éste
ser ubicado al alcance de los niños pequeños.
5. Desenchufe el cable eléctrico antes de instalar, proporcionar
servicio o mover el Ventilador.
ADVERTENCIA:
NO DEPENDA DEL INTERRUPTOR DE
ENCENDIDO-APAGADO COMO EL ÚNICO MEDIO PARA
DESCONECTAR LA POTENCIA AL INSTALAR O
PROPORCIONARLE SERVICIO AL VENTILADOR.
DESENCHUFE SIEMPRE EL CABLE ELÉCTRICO.
6. Este Ventilador NO debe usarse en ubicaciones potencialmente
peligrosas, tales como en ambientes inflamables, explosivos,
cargados de sustancias químicas o húmedos.
7. NO use el Ventilador en o cerca de una ventana. La lluvia puede
generar riesgos eléctricos.
ADVERTENCIA:
ESTE ARTEFACTO POSEE UN ENCHUFE
POLARIZADO (UNA ESPIGA ES MÁS ANCHA QUE LA
OTRA). PARA DISMINUIR EL PELIGRO DE GOLPES DE
ELECTRICIDAD, ESTE ENCHUFE DEBERÁ INTRODUCIRSE
EN UN TOMACORRIENTE POLARIZADO SÓLO DE UNA
FORMA. HAGA ENCAJARTOTALMENTE LA ESPIGA ANCHA
DEL ENCHUFE EN LA RANURA ANCHA. SI EL ENCHUFE
NO ENCAJA POR COMPLETO EN EL TOMACORRIENTE,
INVIERTA EL ENCHUFE. SI AUN ASÍ NO ENCAJA,
CONTACTE A UN ELECTRICISTA CALIFICADO. NO INTENTE
BURLAR ESTA FUNCIÓN DE SEGURIDAD.
ADVERTENCIA:
ESTE ENCHUFE ES UNA MEDIDA DE
SEGURIDAD. PARA REDUCIR EL RIESGO DE INCENDIO,
CHOQUE ELÉCTRICO Y LESIONES PERSONALES, NO
QUITE, NI REEMPLACE, NI REPARE O ALTERE EL
ENCHUFE QUE SE PROVEE ORIGINALMENTE. SI EL
VENTILADOR NO FUNCIONA CORRECTAMENTE, PUEDE
CONSERVE ESTAS INSTRUCCIONES
4924ES
Rev. A 9/04
VENTILADOR OSCILANTE HBV DE
ALTA VELOCIDAD
MODELO 4924
MANTENIMIENTO AL PRODUCTO DESCRITO.
DEBERSE
AL
DISPOSITIVO
INCORPORADO EN ESTE ENCHUFE.
8. De ser posible, evite el uso de cables de extensión. Si debieran
usarse, minimice el riesgo de sobrecalentamiento procurando
que estén aprobados por UL. Nunca use un solo cable de
extensión para hacer funcionar más de un Ventilador.
9.No haga funcionar ningún Ventilador con un cable o enchufe
dañado o después de que el ventilador presente algún desperfecto
o haya sido dejado caer o sufriera cualquier tipo de daño. Regrese
el Ventilador a un servicio de reparación autorizado para examinar
el Ventilador, efectuarle ajustes eléctricos o mecánicos o repararlo.
10.No introduzca ni permita que se introduzcan dedos u objetos
extraños en ninguna abertura de ventilación o escape, puesto
que podría provocar un golpe de electricidad, incendio, o daños
al ventilador. No bloquee ni manipule el Ventilador de ninguna
manera mientras esté en funcionamiento.
11.Siempre coloque el Ventilador sobre una superficie, estable, plana
y horizontal mientras esté en funcionamiento, para evitar la
posibilidad de que el Ventilador se dé vuelta. Ubique el cable
eléctrico de tal modo que el ventilador u otros objetos no
descansen sobre él. No disponga el cable eléctrico debajo de
alfombras. No cubra el cable eléctrico con tapetes, alfombras
continuas u objetos similares. Coloque el cable eléctrico fuera
del paso de las personas y donde nadie se tropiece con el mismo.
12.Este Ventilador no ha sido diseñado para usarse en lugares mojados
o húmedos. Nunca coloque un Ventilador donde quepa la posibilidad
de que caiga en una bañera u otro recipiente con agua.
13.No use el Ventilador en exteriores.
ADVERTENCIA:
DISMINUYA EL RIESGO DE INCENDIO
O GOLPES DE ELECTRICIDAD – NO USE ESTE
VENTILADOR CON ARTEFACTOS DE CONTROL DE
VELOCIDAD EN ESTADO SÓLIDO.
3
DE
SEGURIDAD
4924ES