Making Latte; Cleaning And Maintaining Your Machine - TM Pro Serie Manual De Instrucciones

clean your frothing wand and frothing tip (Fig. 4) and wash the frothing sleeve after
each use to ensure the frother continues to work properly. (see chapter 8b)
• 10. Turn the machine off by pressing the power Button on the side of the machine.
Unplug the power cord and allow the machine to cool. CAUTION! after frothing or
steaming milk, the frothing wand, frothing tip, and frothing sleeve will be VERY HOT!
Do not contact metal parts! To avoid potential injury, always make sure that all parts
have cooled down completely before handling.

7. Making Latte

Latte is the combination of one or two shots of espresso with an equal or larger amount
of hot steamed milk with very little or no froth. Without the frothing sleeve, the frothing
wand will steam, not froth the milk. remove the frothing sleeve (Fig. 4) then proceed
with steaming the milk as described in chapter 6. pour hot, steamed milk over espres-
so. Follow steps 9 & 10 above in chapter 6, "making cappuccino" to clean and power
down the machine.
CAUTION! after frothing or steaming milk, the frothing wand and frothing tip will be
VERY HOT! Do not contact metal parts! To avoid potential injury, always make sure
that all parts have cooled down completely before handling.

8. Cleaning and Maintaining Your Machine

8a. Daily Cleaning
• 1. always make sure the control Knob is in the ""o"" position and the machine is
powered off by pressing the power Button on the side of the machine so that the blue
light is turned off. Unplug the cord from the outlet and allow all of the parts to cool
before cleaning.
• 2. remove and wash the frothing sleeve (Fig. 4) and wipe the frothingwand with a
damp cloth.
• 3. The water tank, sieves and drip tray can be washed in a solution of hot water and
mild liquid soap.
CAUTION! Do not immerse appliance in water, in any other liquid or place in the
dishwasher.
NOTE: never use abrasive cleansers, steel wool pads or other abrasive materials to
clean the machine.
8b. Cleaning the Frothing Wand
It is recommended to purge (chapter 6, point 3) and wipe the frothing wand clean with a
damp cloth each and every time immediately after frothing or steaming milk to prevent
build up. Thoroughly clean the frothing wand before turning off the machine to ensure
cleanliness.
16
INGLÉS