Handle Installation & Sealing - OVE SHELBY 60 Manual Del Usuario

HANDLE INSTALLATION & SEALING
1. Install the door handle (H & I) using an Allen key.
2. Ensure that the door closes and opens smoothly, and that there is a tight connection between the side glass
panels and the frame as well as the support bar.
Apply a clear silicone water sealant around the outside perimeter of any fixed shower components (horizontally
between bottom of fixed glass panel and the base, as well as vertically between the wall, glass frames, and
any side glass panel).
Allow 24 hours for silicone to dry.
Improper application of silicone sealant may cause your shower to leak.
1
I
H
2
14