5.4 Instant Recording
5.5 Time Shift
Time Shift is a time-delayed broadcast of the channel that you are watching. To use time shift, the channel must be recorded. In other
word, Time Shift option must be set to 1 or 2 Hour in PVR setup menu or you have to record the channel explicitly.
1) Pause a channel by pressing PAUSE(
2) Resume the channel by pressing PAUSE(
3) If you want to jump to live channel, please press STOP(
28
MANUAL_GI ST9195_9196_Eng_091127.indd 28
You can start recording a channel that you are watching by pressing
RECORD(
) key. You can record 3 channels in same transponder
The default duration is set in PVR Setup Menu and file name is derived from
channel information. You can change duration by pressing RECORD(
one more.
To stop recording, press STOP(
pressing OK key on the list that you want to stop or stop all recording by pressing
RED key.
While you are recording channel, you cannot enter some menu (such as Installa-
tion, Media Setup, etc..)
) key while you are watching a channel, then you can see the shifted time in message
) or PLAY(
) key later, then you can watch the time-delayed channel.
) key.
) key then you can stop recording by
2009-11-28
) key
1:59:51