Disinfecting
Please follow the following steps to disinfect your nebulizer unless otherwise
speci ed by your physician. It is suggested that the unit is disinfected after the
last treatment of the day.
1. Use one part white vinegar with three parts distilled water. Make sure mixed
solution is enough to submerge the nebulizer, mouthpiece and mask.
2. Complete Rinsing Steps 1-3.
3. Wash nebulizer cup, mouthpiece and mask in warm water and a mild
detergent. Then wash them in hot tap water.
4. Submerge these parts in the vinegar and water solution for thirty minutes.
5. Complete Rinsing Steps 3-5.
Cleaning the Compressor
1. Wipe daily with a damp cloth.
2. Do not use any powdered cleaners or soap pads, which may damage
the nish.
Filter Change
1. Do not use cotton or any other materials. Do not wash or clean the lter. Only
use lters supplied by your distributor. And do not operate without a lter.
2. Changing procedure:
A. Remove the lter cover.
B. Replace the used lter with a new lter.
C. Replace the lter cover.
6.
REPLACEMENT PARTS AND ACCESSORIES
Contact your healthcare distributor for replacement parts or accessories.
6