Installation Instructions - e-conolight E-ACP Serie Instrucciones De Instalación

INSTALLATION INSTRUCTIONS

PHOTOCELL OPTIONS
FIGURE 9- For E-WF1L and E-WF2L
O-ring
Photocontrol
Additional O-ring
Inside Wall
WIRING
1. Wire according to Single Phase Voltage or Phase to Phase Voltage.
FIGURE 10
SINGLE PHASE VOLTAGE
Voltage
Red
White
Neutral
Ballast
Black
(COM)
or
Driver
Hot
Neutral
(COM)
Additional Nut
Nut
Threaded
Nipple
Wiring
Compartment
Cover
FIGURE 11
PHASE TO PHASE VOLTAGE
Voltage
Red
White
(COM)
Ballast
or
Driver
Hot
Hot
www.e-conolight.com
Document:
LPN00674X0001A0
Created By:
TMT
SHIELD INSTALLATION (E-ACP1 and
1. Screw photocell shield onto nipple of photocell.
2. Firmly hand tighten.
NOTE: If fixture does not turn off, drill a slightly larger hole in the
shield.
Photocell Nipple
Photocell Shield
Black
| 888.243.9445 | FAX: 262.504.5409
Date
ECO#
E-ACP2 ONLY
Knurled Nut
Housing
12-22-2019
011320