Maintenance / Storage - Graham Field LUMEX 6123B Instrucciones De Operacion Y Ensamblaje

Adjust Armrest Tilt
Loosen the armrest tilt adjustment knobs shown
at right and adjust platform tilt up and down
along slots in backside of platform to desired
tilt. Tighten knobs securely to secure arm tube.
Repeat for other side.
Adjust / Secure Arm Strap
Pull hook and loop fastener apart to free arm
strap. Slide arm into position so that armrest is
comfortable and you have a comfortable hold
on handgrip. Secure hook and loop fastener well
so that it is tight but not uncomfortable around
arm. Repeat for other side.
Adjust Attachment Support Height
Loosen both sets of height adjustment knobs shown in picture at
right. Slide support tube up or down to the desired height. Tighten
both sets of knobs securely to secure support tube. Repeat for other
side.
Adjust Attachment Support Angle
Loosen both height angle adjustment knobs shown in picture at
right. Slide both clamps forward or backward along crossbars to
desired angle. Tighten both sets of knobs securely to secure clamps.
Repeat for other side.
OPERATION
WARNING: Before use, practice using the Walker Attachments
with the guidance of a healthcare professional until you are
comfortable with their operation.
WARNING: Before each use, ensure all Walker Attachment
hardware is securely attached.
WARNING: Do not lean too far forward or sideward when using
the Walker Attachments; the walker could become unbalanced
and serious personal injury could occur.
WARNING: Ensure all four legs are in contact with the
floor when weight is exerted on the walker with the Walker
Attachments.

MAINTENANCE / STORAGE

Maintenance: To remove dust and dirt, wipe the Walker Attachments gently with a clean,
soft, damp cloth. To clean them, use a clean, soft cloth dampened with a mild soap and water
solution, rinse with clear water, then dry with a soft cloth. To aid in rust prevention, lubricate
adjustment knob threads.
s NOTICE: DO NOT use solvents, abrasive cleaners, or scouring pads to clean this
product.
Storage: To remove platform attachments for storage, remove lower clamps and hardware from
walker crossbars; package and keep them with the Walker Attachments for future use. Store in
a clean, dust-free environment.
6132B-INS-LAB-RevA18
armrest
platform
support tube
Adjust Armrest
handgrip
arm strap
armrest tube
armrest tube length
adjustment knobs
armrest tilt
adjustment knobs
support tube
clamp
adjustment
knobs
crossbar
clamp
adjustment
knobs
Adjust Walker Attachment
Height
3