Installation Instructions for AXBUCS-NI246V
• Pre-wired AXSWC harness (AXSWC sold separately)
• Retains the factory AUX-IN jack
• Retains the factory backup camera to an aftermarket radio*
• Includes the AXCSD-6V 12-volt to 6-volt converter
* Will not work with models equipped with an "All Around Camera" system
• AXBUCS-NI246V harness • AXCSD-6V 12-volt to 6-volt converter
NISSAN
Altima 2013-Up
Cube
2011-2014*
* For use when retaining the OE backup camera only
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Axxess Integrate
REV. 5/19/20
AXBUCS-NI246V
Nissan (with NAV) 2011-Up
INTERFACE FEATURES
INTERFACE COMPONENTS
APPLICATIONS
Frontier 2013-Up*
Juke 2011-2014*
NV
2012-Up*
NV200 2012-Up*
TOOLS REQUIRED
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Rogue (w/ Bose)
2012-2013*
Rogue
Sentra 2011-Up*
axxessinterfaces.com • metraonline.com
Titan 2013-2015*
Versa 2013-Up*
2011*
Xterra
2013-2015*