JVC KW-XG811 Manual De Instrucciones página 12

Menu item
1
SCROLL *
TAG DISPLAY
2
SSM *
Strong-station
Sequential
Memory
2
MONO *
Monaural mode
IF BAND
Intermediate
frequency band
3
FADER *
BALANCE
LOUD
Loudness
VOL ADJUST
Volume adjust
1
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
2
* Displayed only when the source is "FM."
3
* If you are using a two-speaker system, set the fader level to "00."
12 ENGLISH
Selectable setting, [
• SCROLL ONCE : Scrolls the displayed information once.
• SCROLL AUTO : Repeats scrolling (at 5-second intervals).
• SCROLL OFF : Cancels.
Pressing DISP for more than one second can scroll the display
regardless of the setting.
• TAG ON : Shows the Tag information while playing MP3/WMA
tracks.
• TAG OFF : Cancels.
• SSM 01 – 06 : For settings, see "Automatic presetting (FM)—SSM
• SSM 07 – 12 (Strong-station Sequential Memory)" on page 6.
• SSM 13 – 18
• MONO ON : Activate monaural mode to improve FM reception,
but stereo effect will be lost. ( See page 6.)
• MONO OFF : Restore the stereo effect.
• AUTO : Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may
be lost.)
• WIDE : Subject to interference noises from adjacent stations,
but sound quality will not be degraded and the
stereo effect will remain.
R06 – F06 : Adjust the front and rear speaker output balance.
[ 00 ]
L06 – R06 : Adjust the left and right speaker output balance.
[ 00 ]
• LOUD ON : Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
• LOUD OFF : Cancels.
VOL ADJ –05 — : Preset the volume adjustment level of each source
VOL ADJ +05 (except FM), compared to the FM volume level. The
[ VOL ADJ 00 ] volume level will automatically increase or decrease
when you change the source.
• Before making an adjustment, select the source you
want to adjust.
• "VOL ADJ FIX" appears on the display if "FM" is
selected as the source.
]
Initial: Underlined