Unpacking; Assembly And Pre-Operation - Campbell Hausfeld PW2725 Manual Del Usuario

Pre-Operation
Keep hose away
from sharp
objects bursting hoses may cause
injury. examine hoses regularly and
replace if damaged. do not attempt
to mend a damaged hose.

uNPACKING

Remove the equipment and all parts
from the carton . The carton should
contain the following:
• One pressure washer (pump, engine,
cart base)
• One cart handle assembly
• One spray gun and quick connect
lance
• Five spray tips
• One high pressure hose
• One pack of nuts, bolts, and manuals
If any parts are missing, DO NOt
returN the uNIt tO the retAIler.
Know the unit's model number (located
on the serial number tag on the
pressure washer frame) and call 1-800-
330-0712 for replacement parts .
After unpacking the product, inspect it
carefully for any damage that may have
occurred during transit . Make sure to
tighten fittings and bolts before using
the pressure washer .
do not operate
the unit if
it's damaged during shipping,
handling, or use. damage could
result in bursting and cause injury
or property damage.
ASSeMblY
1 . Slide the handle assembly over the
lower legs of the cart base. Use the
star knob and bolt to secure the
legs . See Figure 1 .
Figure 1 – Assemble handle
2 . Slide clear plastic detergent hose
onto brass hose barb (See Figure 2) .
Figure 2 – Attach suction tube to barb
fitting
3 . Insert quick connect spray tips into
rubber holders on front of the
placard . (See Figure 3) .
Figure 3 - Insert spray tips into the
holder
4 . Secure garden hose (not included) to
the inlet connection on pump (See
Figure 4) .
Star
Knob
Figure 4 - Pump hook up
PW2725, PW3230, PW4035
5 . Connect the high pressure hose to
Figure 5 – Connect high pressure hose
to pump
6 . Attach the lance with nozzle to the
Figure 6 – Attach lance to gun
Thermal
Relief
Garden Hose
5
the pump outlet (See Figures 4 and
5) .
gun (see Figure 6) .
Chemical Injector
Hose Barb
High Pressure
Hose
Pump
Outlet
Pump
Inlet
www.chpower.com