Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Master/slave Mode
•
When the LCD displays shows "SLAVE", it en
ters the M/S mode.
D. Setting
In the setting menu, press "SETUP" button enter to
select the menu. There are 9 options, you may select
through "UP" and "DOWN" button.
1.
BL Time: to set the LCD light time
2.
Adjust: to set the motor restoration
3.
Reset: to restore factory setting
4.
Power: the voltage of power supply
5.
Error: system self inspection
6.
Lamp: LED information
7.
Use: Time for use
8.
Sensor: sensor setting
9.
About: fixture information
1. When choose "BL Time", press "SETUP" button to
adjust the time: 5s, 10s, 20s, 30s, ON through "UP" and
"DOWN" button.
2.
When choose "Adjust", press "SETUP" button to
select Pan, Tilt through "UP" and "DOWN" button.
•
Pan: Press "UP" and "DOWN" but-
ton to adjust "Pan" position until the pan is
parallel with the base. Press "SETUP" button,
the display shows "Adjust Y/N". Press "SET-
UP" button to adjust the pan. Press "MODE"
button back to the menu.
•
Tilt: Press "UP" and "DOWN" but-
ton to adjust "Pan" position until the light is
parallel with the base. Press "SETUP" button,
the display shows "Adjust Y/N". Press "SET-
UP" button to adjust the pan. Press "MODE"
P. 11
QUATROBEAM MOVE
ENGLISH VERSION
Publicidad
Tabla de contenido
