Second-Curtain Sync; Flash Mode - Manual Flash - Hahnel MODUS 600RT Manual De Instrucciones

• If you set a shutter speed as 1/320s (Auto FP) or 1/250s
(Auto FP) in the Nikon camera setting, <
displayed in the flash screen regardless of actual shutter
speed selected
• With high-speed sync, the faster the shutter speed, the
shorter the effective range
• To return to normal flash, set the camera flash sync speed
to other option other than Auto FP. Then the icon <
will no longer be shown when half pressing the camera
shutter button
• Multi- RPT mode cannot be set in high-speed sync mode
• Over-temperature protection may be activated after 15
consecutive high-speed flashes

Second-Curtain Sync

The Second curtain sync (Rear curtain sync) can be
enabled from the camera. Please refer to camera
instruction manual for further details.
• When rear curtain sync is enabled it will not be displayed
on the modus 600RT speedlight. See LCD on camera.

Flash Mode - Manual Flash

The flash output is adjustable from 1/1 full power to
1/128th power in 1/3rd stop increments. To obtain a
correct flash exposure, use a hand-held flash meter to
determine the required flash output.
20
SET
> will be
1. Press < MODE >
button so that < M > is
displayed
2. Turn the Select Dial to
choose a desired flash
output amount
3. Press < SET > button
again to confirm the
setting
>
Modus 600RT