Dandy DUF206E1WDD Guía Del Proprietario De Utilizacion Y Cuidado página 9

Operating Instructions
INDICATORS
High Temperature Alarm
When the appliance is in fridge mode, if the internal temperature is above 15°C (59°F) for more than
36 hours, the high temperature alarm will sound. The High Temp indicator light will illuminate and the
appliance will make a buzzing sound for 10 seconds every thirty minutes. Press any button on the
display to quiet the high temperature alarm. The alarm will automatically turn off when the internal
temperature drops below 12°C (54°F).
When the appliance is in freezer mode, if the internal temperature is above -8°C (18°F) for more than
36 hours, the high temperature alarm will sound. The High Temp indicator light will illuminate and the
appliance will make a buzzing sound for 10 seconds every thirty minutes. Press any button on the
display to quiet the high temperature alarm. The alarm will automatically turn off when the internal
temperature drops below -12°C (10°F).
Door Open Alarm
If the door remains open for more than 5 minutes, the door open indicator light will illuminate and a
buzzer will sound. Press any button on the display or close the door to quiet the door open alarm.
BUTTONS
Quick Freeze Button
The Quick Freeze function will allow the appliance to run continually for 3 hours in order to reach and
maintain a temperature of -25°C (-13°F). Press the Quick Freeze button to begin Quick Freeze mode
and the blue snowfl ake icon will illuminate. After 3 hours the appliance will automatically return to
regular functioning. If the appliance is unable to reach -25°C (-13°F), the Quick Freeze function will
shut off after 24 hours.
Lock Button
The lock button will lock the control panel so that no changes can be made to the programming.
Press and hold the lock button for 3 seconds to engage the control panel lock. The lock icon will
illuminate and the appliance will beep. Press and hold the lock button for 3 seconds to remove the
control panel lock. The lock icon will turn off and the appliance will beep.
Freezer / Fridge Switch Button
The Freezer / Fridge switch button will tell the appliance whether to operate as a freezer or as a
fridge. Press and hold the Freezer / Fridge button for 3 seconds. The upper dot icon will illuminate
and the appliance will beep to indicate that the appliance is operating as a freezer. When the
appliance is operating as a freezer, press and hold the Freezer / Fridge button for 3 seconds and the
lower dot icon will illuminate and the appliance will beep to indicate that the appliance is operating as
a fridge.
The temperature range for the freezer operation is -12°C ~ -24°C (10°F ~ -11°F).
The temperature range for the fridge operation is 2°C ~ 8°C (35°F ~ 46°F).
Up and Down Buttons
Press the down button to reduce the set temperature. Press the up button to raise the set
temperature.
°C / °F Button
To change the display scale, press and hold both the up and down buttons for 3 seconds.
Reset Button
To reset the programming of the appliance, press and hold the lock button and the up button at the
same time for 3 seconds. The appliance will beep and all icons on the display will illuminate for 3
seconds. If the compressor is running, it will pause for 5 minutes as the internal control board resets.
Normal functioning will resume after 5 minutes.
7