Alternatively, you may clean the shaver using the
brush provided:
• Switch off the shaver. Remove the foil and
cutter cassette
surface. Using the brush, clean the inner area
of the pivoting head. However, do not clean the
cassette with the brush as this may damage it.
Cleaning the housing
From time to time clean the housing of the
shaver and the Clean&Renew station with a
damp cloth, especially inside the cleaning
chamber where the shaver rests.
Replacing the cleaning cartridge
After having pressed the lift button
housing, wait for a few seconds before removing
the used cartridge to avoid any dripping.
Before discarding the used cartridge, make sure
to close the openings using the lid of the new
cartridge, since the used cartridge will contain
contaminated cleaning solution.
Keeping your shaver in top shape
Replacing the foil and cutter cassette / reset
To maintain 100% shaving performance,
replace the foil and cutter cassette
the replacement symbol lights up on the shaver
r
display
(after about 18 months) or when
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the foil and cutter
cassette. Then the shaver will automatically reset
the display.
After you have replaced the foil and cutter
cassette, use a ball-pen to push the reset button
e
for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Accessories
Available at your dealer or Braun Service
Centers:
• Foil & Cutter cassette 70S
• Cleaning cartridge Clean&Renew CCR
8
and tap it out on a fl at
2
to open the
8
, when
r e l e as e
r e l e as e
washable
washable
r e l e as e
r e l e as e
r e l e as e
r e l e as e
washable
washable
new
new
old
old
9000
9000
S e r i e s
S e r i e s
r e l e as e
r e l e as e
r e l e as e
r e l e as e
washable
washable
washable
washable
360°Complete
360°Complete
70S
70S
washable
washable
9000
9000
70S
70S
S e r i e s
S e r i e s
11