Descargar Imprimir esta página

Moving The Vac; Blowing Feature - Craftsman 113.170660 El Manual Del Propietario

Ocultar thumbs Ver también para 113.170660:

Publicidad

Idiomas disponibles

Idiomas disponibles

SP6570 16 gallon detach
Operation (continued)
Cord Wrap
When vacuuming is complete, unplug the
cord and wrap it around the cord wrap
ears on top of vac.
Cord Wrap Area

Moving the Vac

Should it become necessary to pick the
vac up to move it, the handle on the sides
of the dust drum are used to lift. To maneu-
ver the vac, the push/pull handle in the
rear of the unit should be used.
Handle

Blowing Feature

Your wet/dry vac has a "detachable blow-
er". It has the capability to be used as a
dedicated blower for yard work, patio
cleanup and workshop applications to
blow sawdust and other debris.
WARNING:
Always wear safety
goggles complying with ANSI Z87.1
(or in Canada CSA Z94.3) before using
as a blower.
12/8/04
8:47 AM
Page 11
WARNING:
injury to bystanders, keep them clear
of blowing debris.
CAUTION:
ing damage, wear ear protectors when
using the vac/blower for extended
hours or when using it in a noisy area.
WARNING:
blowing creates dust which might be
inhaled.
1. Familiarize yourself with the detach-
able blower portion of your wet/dry
vac.
2. Remove the detachable blower of your
vac by pressing down on the latch
under the handle of the detachable
blower. This latch holds the detach-
able blower to the lid assembly.
3. Lift the detachable blower up by rais-
ing the handle upward and pulling the
unit away from the nested position of
the hinges.
Handle
Assemble the Detachable
Blower for "Blowing"
This may be assembled two ways.
1. Insert the small end of one of the
extension wands into the blowing port
of the detachable blower. Insert the
male-to-male adapter into the exten-
sion wand and install the blower noz-
zle onto the male-to-male adapter.
2. Insert the male-to-male adapter into the
blowing port of the detachable blower.
Connect the large end of the extension
wand to the male-to-male adapter.
Connect the blower nozzle to the
extension wand.
3. Turn the blower "ON" by toggling the
switch in the handle of the blower to the
"ON" position.
11
To reduce the risk of
To reduce the risk of hear-
Wear a dust mask if
— OR —

Publicidad

loading