Routine Care - BOND MANUFACTURING HYFP40205-2 El Manual Del Propietario

TO EXTINGUISH
Push and turn burner control knob to the "OFF" position.
1
Close the LP tank valve.
2
Disconnect the regulator from the LP tank to close the
3
gas supply when not in use.
Make sure that the unit is completely cooled before
4
touching any of the components or putting on the cover.

ROUTINE CARE

• Keep your appliance free and clear from combustible materials.
• Visually inspect burner for obstructions, keep tank enclosure free and clear from debris.
• After the burner and lava rocks are completely cooled down, use a soft brush to get rid of the mild stains, loose dirt and soil.
Wipe with a soft cloth.
STUBBORN STAINS
• Stubborn stains, discoloration and possibly rust pitting can occur from exposure to harsh outdoor conditions.
• Be careful not let any powder or solvent come in contact with painted or plastic components as damage may occur.
MAINTENANCE
• Store the appliance in a cool dry place away from direct sunlight.
• Make sure both the gas and the appliance are turned off before changing battery. Please refer to the process of inserting battery.
• Protect your appliance with the cover when not in use.
• The propane cylinder must be disconnected and stored outdoors before the appliance can be stored indoors.
• Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise may void the warranty of this product
and result in a hazardous condition.
• Please contact the Manufacturer for information regarding replacement hoses, thermocouples, ignitors, lava rocks, ceramic
logs,etc.
10