Routine Care - BOND MANUFACTURING 67513 Instrucciones De Montaje

TO EXTINGUISH
Push the Control Knob and turn clockwise to the "OFF" position.
•
Turn the cylinder valve on the gas tank clockwise to close the gas supply if not in use for a long time.(See figure below)
•

ROUTINE CARE

•
Keep your firebowl free and clear from combustible materials.
Visually inspect burner from obstructions and keep fireplace free and clear from debris.
•
After the burner and lava rocks are completely cooled down, use a soft brush to get rid of the mild stains,
•
loose dirt and soil. Wipe with a soft cloth.
STUBBORN STAINS
•Stubborn stains, discoloration and possibly rust pitting can occur from exposure to harsh outdoor conditions.
•Be careful not let any powder or solvent come in contact with painted or plastic components as damage may occur.
MAINTENANCE
•Store the firebowl in a cool dry place away from direct sunlight.
•The propane cylinder must be disconnected and removed from the firebowl before the appliance can be stored indoors.
•Make sure both the gas and the firebowl are turned off before changing battery. Please refer to the process of assembling
battery.
•Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise this may void the warranty of this product
and
result in a hazardous condition.
• Please contact the Manufacturer for information regarding replacement hoses, thermocouples, ignitors, lava rocks, etc.
IF YOU HAVE QUESTIONS OR CONCERNS
PLEASE CALL BOND TOLL FREE #
1-866-771-BOND(2663) OR TO BETTER EXPEDITE
YOUR REQUEST FEEL FREE TO EMAIL US
customer.service@bondmfg.com
OR LOG IN TO OUR WEBSITE UNDER CUSTOMER SERVICE SUPPORT
www.bondmfg.com
BOND MANUFACTURING CO.
1700 West 4th Street Antioch, CA 94509 USA
8