ICON TARMAC 2 BOOT Manual Del Usuario página 9

Chart 2: Tarmac 2 Boots Type Examination Test Results
Test
Sole
Transverse rigidity of footwear
Optional Requirements
Slip resistance of sole
Fig. 1
Technical Standard Reference
EN 13634:2010 Section 6.1
EN 13634:2010 Section 5.4
Key
1 = Zone 1 shin region
2 = Zone 2 ankle region
Area A
Area B
Unit
kN Level 1: ≥ 1.0 kN
Level 2: ≥ 1.5 kN
B) Surface: smooth steel - Lubricant: glycerol
heel mode (7°) ≥ .13
flat mode ≥ .18
Chart 3: Dimensions For Material Areas Shown In Fig.1
Size Size
(Paris Points) (English)
38 and Below 5 and below
39-42 5.5 to 8
43 and above 8.5 and above
The lower tangent of Zone 2 is used to define the lower limits of measure-
ment E&F. Zone 2 is located by centering point X over the natural center of
the ankle as felt through the footwear when worn.
Requirement
"E"
Minimum (mm) Maximum (mm)
40
50
55
Result
Level 2
SRB
"F"
120
125
130
07