Emptying The Dirty Water Tank - Bissell SPOTCLEAN PRO 3624 Serie Manual Del Usuario

Emptying the Stain Trapper Tool
(select models only)
1.
To empty the tool, rotate
the small tank on the bottom
to unlock it.

Emptying the Dirty Water Tank

We have additional tips for maintaining your machine at support.BISSELL.com.
1.
When the Dirty Water Tank
reaches the "FULL" line it is
time to empty.
4.
Remove lid and pour out
dirty water. Rinse out tank to
remove any debris.
WARNING
or troubleshooting.
WARNING
over-spraying. Keep spray away from face. Failure to do so may result in personal injury.
2.
Dump dirty water into a sink
or toilet and rinse the tank out
with clean water.
2.
Remove Dirty Water Tank
and carry to disposal area.
5.
Replace the tank lid and
rotate the handle forward to
lock back into place.
To reduce the risk of fi re, electric shock or injury, turn power OFF before performing maintenance
When using the Deep Stain Tool, always keep the tool in direct contact with carpeting to avoid
3.
Replace the tank by lining
up the locking teeth with their
mating slots (make sure the
two teeth that are closest
together are pointed toward
the brush). Turn the tank to
lock it into place.
3.
Unlock by rotating the
handle up and over the back of
the tank.
6.
Before placing tank back
into the machine, remove any
debris from the red filter.
BISSELL.com 5