Rowenta AU4010F0 Instrucciones De Uso página 16

EN
Installation 1 - mobile installation
1/ Click the exhausted nozzle (#15) to the exhausted connector without notches (#14)
2/ Slide the other exhausted connector (#13) to the air outlet (#9) on the rear of the unit and push the
rocker switch to fix the assembly firmly. (Fig 3 &4) Extend hose (#13) to desired length and position
the exhausted nozzle (#15) through an open window as shown on fig.5.
Fig. 3 & 4
Fig. 5
Semi-permanently installation
If required, your appliance can also be installed semi permanently (Fig. 6)
Proceed as follows:
• Drill a hole in an outside wall or through a window pane. Ensure the MIN / MAX dimensions for the
hole size and its position are adhered to. (Fig. 7 and 8)
• Fit the wall flange accessory (#16) provided in the hole.
• Insert another end of the hose assembly to the fixture previously fit on the wall a shown in (Fig. 6)
When the hose is not in use, place the cap (#16) on connector to cover the hole on the wall.
NOTE: When installing the air conditioner semi permanently, to maintain the balance of air pressure
between indoors and outdoors always leave an internal door slightly open.
Fig. 6
16