koban KDP6 Manual Del Usuario página 30

KDP6
Wall presence detector
Pay attention to the walking
direction in the test proceeding, the
detection area cross to detector is
Wiring (See FIG. 5)
Verify carefully and make sure the
wires are connected correctly.
Type 1
Type 2
lnstallation procedure
KDP6 can be installed on the wall
directly, recess / corner with wall
bracket,or on the ceiling directly.
Instructions manual | 30
up to 10 m, and frontal to detector is
1m (See FIG.4).
NOTE
Motion detector KDP6 was set for
wall mount before ex-factory.
Wall mount
• Unscrew the front cover by
screwdriver.
• To lnsert the "-" head
screwdrlver blade lnto the gap
between front cover and bottom
case,then rotate anti-clockwise
90' to detach the front cover
(See FIG.6).
www.grupotemper.com