HAMPTON BAY 91133 Guía De Uso Y Cuidado página 12

Assembly - Attaching the Light Kit
1
Attaching the light kit
WARNING: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the light kit fitter
assembly (F).
□
Connect the wires exiting the bottom of the motor assembly
(E) by connecting the molded adaptor plugs together (blue to
blue, and white to white).
□
Slide the light kit (F) and secure it to the switch housing
using the three screws (QQ) that were removed in the first
step.
2
Installing the bulbs and attaching
the lamp shade
CAUTION: Make sure the power is off before attaching or
lamp shade (G)
removing the
CAUTION: Over lamping the fan will result in the fan lights
shutting down until the proper wattage bulbs are installed.
Reset the lights by turning off the power, replacing the bulbs
with the correct wattage bulbs, and turn the power on.
WARNING: Allow the
before removing.
□
Gently slide the lamp shade (G) over the lamp holder. Make
sure the lamp shade (G) is fully inserted into the socket for
a secure fit. Repeat for the remaining lamp shades (G).
□
With the power off, insert and tighten the light bulbs (K)
(included) into light kit sockets. Use 9.5W LED bulbs.
□
Attach the pull chain extensions (BB).
.
lamp shade (G)
to cool completely
F
G
K
12
E
QQ
F
BB