Operation - HAMPTON BAY 91133 Guía De Uso Y Cuidado

Assembly - Attaching without the Light Kit
1
Assembling the fan without light kit
□
Remove the three light kit mounting screws (QQ) from the
switch cup cover (J).
□
In order to use the fan without the light kit, remove the
switch cup cover (J) from the top of the light kit fitter
assembly (F) by removing the center hex nut inside the
switch cup cover (J ), and then thread the switch cup cover
off of the threaded nipple on the top of the light kit fitter
assembly (F).
□
Position the switch cup cover (J) onto the bracket and
reinstall the light kit mounting screws (QQ).

Operation

Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
The slide switch controls (XX) the direction of the blades:
Forward (switch down) or Reverse (switch up).
NOTE: Wait for the fan to stop before reversing the direction of
blade rotation.
A. Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
J
XX
XX
13
Please contact 1-855-HD-HAMPTON for further assistance.
E
QQ
A. Warm weather
B. Cool weather
HAMPTONBAY.COM