Pur Line COOLY 9000 A Manual De Instrucciones página 32

INSTALLATION
If tipped more than 35°, allow the unit to set upright for at least 24 hours before start up.
The appliance must be placed on flat level floor.
Do not cover or obstruct any openings in the appliance.
The required distance around the appliance from other objects must be at least 50cm.
Socket wiring should be in accordance with the local electric safety requirements.
EXHAUST HOSE INSTALLATION:
1
4
The air conditioner requires being vented outside so that the exhaust air can escape the room which
coming from the appliance contains waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased efficiency, even worse shut down the
unit due to low backpressure.
1. Extend the air exhaust duct by drawing out the two ends of the duct.
2: Connect the hose connector to one end of the exhaust hose.
3: Connect the windows kit adapter to the other end of the exhaust hose.
4: Extend the adjustable window kit the length of your window. Connect the exhaust hose to the window
kit.
5: Close your window to secure the kit in place. It needs to hold the windows kit firmly in place, secure the
window kit with duct tape if required. It is recommended that the gap between the adapter and the sides
of the window should be sealed off for maximum efficiency.
6: Attach the hose connector to the exhaust air outlet of unit.
7: Adjusting the length of the flexible exhaust hose, and avoid bends in the hose. Then place AC near an
electrical outlet.
EN
2
5
30
3
6