Troubleshooting - Kalorik WFVC 43331 Manual De Instrucciones

Fax +1 305 430 9692

Notes:
 Do not wash the filter in the dishwasher or in the washing
machine. Do not use a hair dryer to dry the filter.
 Always make sure the filter is in place before operating the
appliance. Never use without the filter.
 The filter should be cleaned twice a year. If visibly dirty, clean it at
once. Replace the filter if damaged.
 To replace the filters, please follow instructions provided in the
separate installation guide.
STORAGE: Wrap the power cord around the main body. Insert the
hook of the adjustable tube into the side of the main body. Then,
insert the dust brush and crevice tool into the base (Fig. 19).

TROUBLESHOOTING

ISSUE
The vacuum
cleaner won't
run.
Suction is
reduced
CAUTION
 Do not pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes.
 Do not use to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International USA.
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don't change the page numbering.
Keep the language integrity.
POSSIBLE REASON
1. Switch button is not on.
2. Power cord is not firmly
plugged into the outlet.
3. Thermal protector is
activated.
4. There is too much water
in the barrel.
1. The hose or tube is
clogged.
2. Filter is clogged.
3. Floor brush is clogged.
10
Assembly page 10/40
Print only what is inside the frame.
POSSIBLE SOLUTION
1. Turn the switch button
On.
2. Check that the plug is
inserted firmly into the
electrical outlet.
3. Allow cleaner to cool.
4. Remove some of the
water.
1. Clean tube and/or
hose.
2. Clean the filter.
3. Check floor brush and
clean if necessary.
WFVC 43331 - 120501