Descargar Imprimir esta página

Gardner Denver Elmo Rietschle SAH 25 Instrucciones De Uso página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
Operating Instructions
Side channel vacuum pumps / Side channel compressors
Q
Pump ranges
These operating instructions concern the following side channel vacuum pumps and compressors: SAH
The performance curves showing capacity against vacuum or pressure can be seen in data sheets D 556/ 1, D 556/ 2 and
D 556/ 3 or D 656/ 1, D 656/ 2 and D 656/ 3.
Description
All SAH models work according to the dynamic compression principle utilising a non contact rotating impellor. They have
a built-in motor. A high efficiency two stage impellor is fitted on to the motorshaft. Models up to SAH / 4.8 kW (picture
use the motor fan for cooling. Models SAH / 5.5 kW and larger (picture
the motor and blower housing.
Air inlet and outlets have built-in silencers with the addition of a mesh disc on the suction silencer to protect the unit from
particles larger than 5 mm. Both the inlet and outlet have an inside connection thread corresponding to DIN ISO 228.
Versions of the SAH have on the suction side a solenoid valve and on the pressure side different connection flanges.
All the parts are made from a special aluminium alloy except for the motor rotor, stator and shaft.
Optional extras: As required, vacuum or pressure limiting valve, non-return valve, suction filter, motor starter, vacuum/
pressure change over valve.
Special versions: anti corrosive internal coating, gas tight version.
N
F
E
F
O
E
N
) have an additional cooling fan situated between
O
F
E
B
A
SAH
SAH 25
SAH 45
SAH 55
SAH 75
SAH 95
SAH 155
SAH 215
SAH 235
SAH 275
SAH 355
SAH 505
)
BE 556
1.10.2008
Gardner Denver
Schopfheim GmbH
Postfach 1260
79642 SCHOPFHEIM
GERMANY
Fon 0 76 22 / 3 92-0
Fax 0 76 22 / 39 23 00
e-mail: info.sch@
de.gardnerdenver.com
www.rietschle.com

Publicidad

loading