Publicidad
Idiomas disponibles
Idiomas disponibles
12. Replace the screw into the bottom of the dome.
13. Test the light for proper operation.
Cleaning Enclosure.
C.
Maintenance procedures sometime require fixtures to be hosed down for good housekeeping.
The circuit must be turned OFF and fixture globe MUST be allowed to cool to ambient room
temperature before cleaning.
The fixture should be cleaned periodically to maintain maximum light output. Only mild, non-
abrasive cleaning agents should be used. The dome should be regularly inspected for scratches and chips,
and if damaged, must be replaced.
D.
Service.
Federal Signal will service your equipment and provide technical assistance with any problems
that cannot be handled locally by Federal Signal's Distributor or Manufacturer Representative.
If any unit returned to Federal Signal for service, inspection, or repair must be accompanied
by a Return Material Authorization number with a brief explanation of the service being requested and/
or the nature of the malfunction. This R.M.A. can be obtained from the local Federal Signal Distributor or
Manufacturer's Representative.
E.
Replacement Parts.
Description
Interior Lens, Clear
Strobe Tube/Trigger Coil Assy.
Circuit Board Assy.
Dome, clear
NOTE
Part Number
K8550C095
K8107177
K2001202-01
K8444D219-04
-5-
Publicidad
