Operating Your Breville Classic Blend Master - Breville Classic Blend Master CBL10XL Instrucciones De Uso

KNOW YOUR BREVILLE BLENDER
Features the unique
Breville Assist Plug.
Easier to insert, easier
to remove.
6
Registered design.
Soft Flexible Lid.
Removable centrally located inner lid.
When the inner lid is inverted, liquids may be
easily added while the blender is in operation.
Extra large, detachable 48oz (1.4 Liter) glass
pitcher works together with the stainless steel
twin blades to create an upward vortex within the
pitcher. This action moves food up and over the
twin blades, producing consistent blending.
Blade assembly features patented 6-way blade
system. Blades are finely honed and shaped to
create a vortex for smooth, even blending and for
crushing ice.
Leakproof rubber gasket seals Glass Jug and
blade assembly.
Metal diecast blender base with heavy duty
construction for professional performance.
Powerful 580 watt high speed motor provides power to
spare. ON/OFF/PULSE control switch for fast and simple
blending. The "PULSE" feature is ideal for quick bursts of
power, ideal for crushing ice. '1=On and 0=OFF' Pulse.
Large convenient speed control switch for
three-speed blending ensures smooth
consistent blending of large and small loads.
Non-skid feet for stability
during blending operation.
Specially designed glass table pitcher, so you can
detach the pitcher and take it directly to tabletop or
counter after blending. Leak proof rubber gasket
seals both the pitcher and blade assembly.
Blades must be handled carefully
because they are sharp!

OPERATING YOUR BREVILLE CLASSIC BLEND MASTER

Before assembling your Blender remove all
promotional labels and wash the glass
pitcher and lid in hot soapy water. Make sure
that the Classic Blend Master is unplugged
and the On/Off/PULSE control switch on the
Blender base is in the "OFF" position.
ASSEMBLY
1. Place rubber gasket on blade assembly.
(see figure 1).
2. Place blade assembly, (with fitted rubber
gasket), into threaded locking ring.
(see figure 2).
Fig. 1
Fig. 2
3. Locate blade assembly and locking ring
into glass pitcher (see figure 3). Turn
counter clockwise to secure firmly
into position.
4. Place assembled glass pitcher onto
blender base (see figure 4). Make sure
that rubber lugs under locking ring match
up with the slots on top of Blender base.
The pitcher and blade assembly can also be tightened by placing the
assembled pitcher onto the blender base, and then turning the pitcher
handle clockwise while holding the blender base (see figure 5). To loosen
threaded locking ring from pitcher, (when empty), turn the pitcher slightly
counter clockwise while holding motor base (see figure 6).
Fig. 3 Fig. 4
Slots
Fig. 5 Fig. 6
7