Alarm - Grundig Ocean Boy 510 Manual De Instrucciones

CLOCK SETTING
Setting the clock time manually
• Make sure that the radio is off.
• Press the TIME SET button and hold it pressed.
• Set the clock time with the + or – buttons.
– A single press of the respective button
GB
switches to the next or preceding minute.
– If the button is held pressed, the setting
changes rapidly (after 4 seconds, at higher
speed).
Setting the day of the week
manually
• Make sure that the radio is off.
• Press and hold down the SNOOZE button and
set the day of the week with the +/– buttons
(in the same way as the clock time).
Setting the alarm time
• Press the ALARM button.
– The display shows the present alarm time.
• Press and hold down the ALARM
and set the alarm time with the +/– buttons (in
the same way as the clock time).
Displaying the alarm time
The alarm time can be checked with the
DISPLAY button, without changing the alarm
mode:
• Make sure that the radio is off.
• Press DISPLAY once to see the alarm time.
– After 3 seconds the display will return to show
the clock time again.
18
button
Wake-up by radio
• Switch on the radio with the ON/OFF button.
• Select a station which will be broadcasting at the
alarm time and adjust the volume to the required level.
• Switch off the radio with the ON/OFF button.
• Press the ALARM button briefly until the radio
alarm indicator ( ) appears on the display.
– At the preselected alarm times the radio will switch on
and switch off again automatically 90 minutes later.
– During the alarm function, the alarm indicator is
flashing on the display.
Wake-up by sound signal
• Press the ALARM button briefly until the sound
signal alarm indicator ( ) appears on the display.
– At the preselected alarm times the sound signal will
switch on and switch off again automatically 90
minutes later.
– During the alarm function, the alarm indicator is
flashing on the display.
Interrupting and repeating the alarm
• The radio alarm or electronic sound alarm can be
interrupted with the SNOOZE button.
– The alarm indicator flashes on the display.
– After about 5 minutes, the alarm comes on again.
• It is possible to interrupt the alarm function several
times during the 90 minutes switch-on period.
Switching off the alarm
• The alarm function can be switched off by pressing
the ON/OFF button.
The alarm remains set to operate the next day.
– If you wish to switch off the alarm completely, press
the ALARM button briefly until the alarm indicator
disappears.

ALARM