First Time Use; How To Take A Temperature - Vicks V980 Manual De Uso Y Cuidado

Description
Power On Turns thermometer on.
Start Button When the Washable Ring is pressed against the skin, to take
temperature, press and hold this button for 1 full second.
Sensor Measures temperature. It will move out when the Start Button
is pressed.
Washable Ring
This is where the sensor is located. The soft washable ring gently
touches the skin behind the ear when measuring temperature.
Screen The screen displays (green) if no fever, (yellow) when the
temperature is slightly elevated and a (red) alert for fever.
Low Battery
Indicates when the battery needs to be replaced.
Indicator
Memory Pressing this Button will recall the last 8 readings.
Battery Door
Provides access to CR2032 battery.
C/F Switch Changes display to Celsius or Fahrenheit.
Sensor
Washable
Ring
Low Battery
Indicator
Screen
Memory
Power On
4

First Time Use

1. Remove display plastic decal.
2. Pull out the plastic strip that is sticking out of the battery door on the
back side of the thermometer. No need to open the battery door. This
will activate the battery.

How to Take a Temperature

1. Press the Power Button.
2. Wait for OK.
3. Place the orange ring of the product on the neck behind the ear lobe.
4. While holding thermometer in that spot, press and hold the Start
Button. When the unit beeps, release Start Button. (Takes about
one second.)
5. Temperature displays.
6. Wait 10 seconds for the count-down to take additional temperatures.
7. Thermometer will shut off automatically after 60 seconds.
1
Start Button
C/F Switch (behind
battery door, next
to battery)
Battery Door
4
2
M
M
5
Beep
M
3
6
M
5