Indicator Leds - Urmet miro 1750 Serie Manual Del Usuario

(*) To enter and exit programming state, hold button
will blink slowly to indicate that programming mode is selected. Programming mode will shut down in
all cases after the 10 minute timeout.

INDICATOR LEDS

8. Green LED under the
On steady:
On blinking:
10. Green LED under the
On steady:
15. Multicolour indicator LED
PRIORITY FUNCTIONS
1 Green blinking: automatic door opener active
2 Red on steady: main calling station door open
3 Slowly blinking red: secondary calling station door open
4 Slowly blinking yellow: programming state on
To save the programming, remember to exit from the same by pressing the
then 5 seconds; in any case, after 10 minutes the device exists the programming state and saves
the parameters changed. Refer to the system booklet for how to program intercom calls.
RESET
To restore default parameters of the device after entering programming mode, hold button
longer than 5 seconds, press the
emit 2 long beeps to confi rm and exit the programming state.
OPERATION WITH A HEARING AID
The video door phone is equipped with a device that enables the hearing impaired with a hearing aid to
be able to hear the person talking from the calling station or from other video door phones in case of calls
from the switchboard. The device is capable of interfacing with hearing aids with "T" function at a distance
of about 20 cm.
PANIC INPUT
Following the closing of a contact connected between the PANIC terminals, the video door phone emits a
panic alarm signal and sends a signal to the concierge control unit, which memorizes it in the events list.
MUTE RING-TONE SPEAKER
It is possible to adjust the call volume to the point of excluding the ring tone (Mute) by moving the sliding
cursor (see § Description of components and features).
The mute state is indicated by a red signal visible in the upper part of the cursor..
10
button
call in progress
conversation ongoing
button
possibility of a door opening
and buttons together for longer than 3 seconds. The system will
Max. 20 cm
pressed for longer than 5 seconds. The yellow LED
Set the switch
to T mode
button for more
pressed for
DS1750-008