Product Usage; Use Of Clutch Device; Lifting Weights; Operation Instructions - SATA 97871 Manual Del Uso

Product Usage :

SADA chain block is a high-efficiency versatile manual lifting device widely used for equipment installation, items lifting, traction of parts
and the like in shipbuilding, electric power, transportation, construction, mining, post and telecommunications and other sectors. It has
unique advantages especially in confined work space, the field, work in the heights and traction in various angles.

Use of Clutch Device :

When there is no load, turn the dial to the " N " position, and pull the lifting chain steadily and slowly to quickly adjust the distance
between the two hooks. If the chain is pulled quickly and given an impacting pulling force, the clutch device will be locked. If the clutch
is locked with load, turn the hand wheel counterclockwise. If it still cannot return to normal, turn the dial to the " DOWN " position and
operate the handle.

Lifting Weights :

With the dial set to the " Up " position during lifting, operate the handle to press the friction lining, the ratchet and the brake seat into one
piece to rotate together, which will drive the long shaft gear, the gear piece, the short shaft gear, the spline gear and the lifting chain
wheel sequentially. Then the chain is tensioned and begins to work. With the dial set to the " DOWN " position during lowering, operate the
handle to lower the weights.

Operation Instructions :

1 ）Never use if overloaded.
2）Never use power other than human strength for operation.
3）All moving parts shall always be well lubricated. Before operation, please confirm that no part is damaged, and test shall be taken if
the idle operation is in good condition. The lifting can only continue if the operation is normal and the brake reliable when the weight
is lifted off the ground.
4）Check whether the hooks are securely installed before lifting. It is not allowed to hang weights with the tip of hook. Ensure that the
lifting chain is not twisted so as to guarantee safety.
5）If the hand pulling force is found greater than the normal during operation, stop using immediately （ unload if necessary ）, and
check（a）whether the weight is connected with other objects ; （ b）whether the parts of the chain block are damaged ; and（c）
whether the weight exceeds the rated load of the chain block.

Maintenance Methods :

1 ）Wipe the oil and water on the chain block after use and store it in a dry place.
2）The maintenance should be carried out by those who are familiar with the mechanism of the chain block, and those who do not
understand the working principle shall not disassemble it.
3）After cleaning and overhaul, the chain block shall be tested for the braking performance and dynamic load performance according
to the provisions to confirm that the operation is normal before use.
4）The friction surface of the brake must keep clean. The brake mechanism shall be inspected frequently to prevent accidents caused
by brake failure.

Warranty :

This product is warranted for six months from the date of purchase without any quality defects or damage.
97871/97872/97873/97874/97875/97876
中文
EN DE RU KO PT JA ES
11