SATA AE3001 Manual Del Uso página 10

3. Use Method and Notes
3.1 Pre-work Inspection
In case of abnormalities, please stop using the product immediately and contact the distributor; the product can be used only when it works
normally after repaired. Otherwise, the product may be damaged, or severe accidents may occur.
※ Note: Check the product before working every day.
Item Content
Whether there is air (water)
leakage
Whether there is deformation or
damage
Hose
Whether there is any stain
Whether the pulling or rewinding
is smooth
Whether there is air (water)
leakage
Connector
Whether there is deformation or
damage
3.2 Pulling Operation
Slowly pull the hose (wire) to the desired length and lock the reel with the ratchet brake; if it is not locked, continue to pull out the hose (wire)
for another 6-40 cm to lock the reel.
※ Note: Pull out the hose (wire) with a force of 1.5-4 Kg, and stop pulling at the warning line of the hose (wire).
3.3 Rollback Operation
To roll back the hose (wire), slowly pull out 6-40 cm to unlock the ratchet brake, and then hold the hose (wire) by hand to allow it to be
rewound slowly under the rollback force of the spring.
※ Note: If the hose (wire) is released suddenly, it will be rolled back quickly, causing out-of-order arrangement and personal injury.
3.4 Completion Inspection
After operation, wipe off the stains on the hose (wire) and connector (socket). In case of abnormalities, contact the distributor immediately.
10
AE3001/AE3002/AE3003/AE3004/AE3005/AE3006/AE3007/AE3008/
AE3009/AE3010/AE3015/AE3016/AE3017/AE3018/AE3019
Method
Listening/visual
inspection
Visual inspection
Wipe
Feel by hand
Listening/visual
inspection
Visual inspection
中文
EN DE
Item Content
Whether there is deformation,
damage or disconnection
Whether there is any stain
Wire
Whether the pulling or rewinding
is smooth
Whether there is deformation or
damage
Socket
Whether there is any stain
RU KO PT JA ES
Method
Visual inspection
Wipe
Visual inspection
Visual inspection
Wipe