EN
WARNING!
Read all safety instructions. Failure to comply with the following safety instructions can cause electric shock,
fire and/or serious injury.
ELECTRICAL SAFETY
•
The main plug must fit the socket. The plug may not be modified in any way. Do not use adaptors with earthed
equipment. Unmodified plugs and appropriate sockets reduce the risk of electric shock.
•
Avoid bodily contact with earthed objects (such as pipes, radiators, ovens and refrigerators). There is an increased risk
of electric shock when your body is earthed.
•
Keep the power tool out of rain and wet environments. Water in the power tool increases the risk of electric shock.
•
Do not use the main cable for purposes for which it is not intended, such as carrying or hanging up the power tool and
do not pull the cable to disconnect the tool or the charger from the mains. Protect the cable from heat, oil, sharp edges
and moving parts.
•
Damaged or twisted cables increase the risk of electric shock. Damaged mains cables must be replaced using original
Blaupunkt replacement parts Main cables may only be replaced by the manufacturer, an authorised service centre or
qualified person.
•
Check extension cables regularly for signs of damage. Damaged extension cables must be replaced.
Cable reels should only be used when fully unwound.
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before using this Power Tool. Keep this manual in a safe place for future reference.
This Power Tool is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or
lack of experience or knowledge.
ELECTROMAGNETIC FIELDS (EMF)
This Power Tool complies with all standards regarding electromagnetic fields (EMF). lf handled properly and according
to the instructions in this user manual, the Power Tool is safe to use based on scientific evidence available today.
Personal Safety
•
Be attentive, concentrate on the job and use common sense when working with power tools. Do not operate
the power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of carelessness
when using the power tool can lead to serious injury.
•
Wear personal protective equipment and always use safety goggles. Wearing personal protective equipment
appropriate the type of power tool and the application (such as a dust mask, non-slip footwear, a safety helmet,
safety goggles or ear protection), reduces the risk of injury.
•
Avoid unintentionally starling the power tool. Ensure that the power switch is in the 'OFF' position before connecting
the power tool to the mains. Carrying the power tool with your finger on the trigger or connecting the power tool
to mains when switched on can lead to accidents.
•
Remove any adjusting tools or keys before turning the power tool on. A tool or key connected to a rotating
part of the power tool can lead to injuries.
•
Do not over-reach. Maintain a stable posture and keep your balance. This can improve your control over the power
tool in unexpected situations.
•
Wear appropriate clothing. Do not wear loose fitting clothes or jewellery. Keep hair, clothing, and gloves away from
moving parts. Loose fitting clothes, jewellery or long hair can be caught up in moving parts.
•
lf dust extraction or collection power tools can be fitted, ensure these are connected and correctly operated.
Using these power tools reduces the danger posed by dust
CORRECT HANDLING AND OPERATION OF POWER TOOLS
•
Do not overload the power tool. Use the appropriate power tool for the job. You can work more safely and effectively
using lhe appropriate power tool within the range of its capacity.
•
Do not use power tools with defective power switches. A power tool which can no longer be switched on and off is
dangerous and must be repaired.
•
Disconnect the charger from the mains before carrying out adjustments, changing power tools or accessories and
putting the power tool away. This precautionary measure prevents unintentional starling.
•
Store power tools out of the reach of children when not in use. Do not allow persons who are unfamiliar with the
power tool or have not read these instructions to use lhe power tool.