Additional Safety Instructions; Safety Notes - Blaupunkt MS2000 Manual Del Usuario

• Maintain the power tool with care. Ensure the moving parts function correctly and do not stick.
Check whether parts are broken or so badly damaged that the power tool's functions are impaired.
Have damaged parts repaired before operating the power tool.
• Many accidents are caused by badly maintained power tools. Keep cutting tools sharp and clean.
Correctly maintained cutting tools with sharp edges are less likely to stick and are easier to use.
SERVICE
• Have the power tool repaired by qualified personnel. Ensure original replacement parts are used. This ensures
continued safe operation of the power tool.

ADDITIONAL SAFETY INSTRUCTIONS

• CAUTION: The use of accessories or attachments other than those recommended in this manual can lead to injury.
• lt is recommended to wear ear protection when operating motor powered power tools.
• Outdoor mains outlets must, according to our regulations, be equipped with a residual-current-operated protection
power tool (RCD). Please observe this when operating our power tools.

SAFETY NOTES

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/
or serious injury. Save warnings and instructions for future reference. When using the power tool, always observe the enclosed
safety warnings as well as the additional safety warnings.
These instructions will make it easier for you to handle the power tool appro priately and help prevent misunderstandings and
possible damage or injury.
• Do not work on materials containing asbestos. Asbestos is considered carcinogenic.
• Do not burn the power tool
• Never attempt to open the power tool
• DO NOT leave this power tool unattended while it is plugged in to the mains.
DANGER
• Never immerse the power tool in water or any other liquids.
WARNING
• Check if the voltage quoted on the model plate of the power tool is suitable for the local mains voltage before
connecting the Power Tool to the mains.
• DO NOT use if the Power Tool has signs of damage to the mains plug / cable, casing or if the Power Tool itself is
damaged). lf the Power Tool leaks or is cracked DO NOT use.
• Please contact us if your Power Tool is damaged.
• The first time you use the Power Tool please check the voltage on the rating label corresponds with your house / local
voltage.
• Do not use if the Power Tool has signs of damage to the mains plug / cable, casing or if the Power Tool itself in
damaged). lf the Power Tool leaks or is cracked DO NOT use.
• Do not allow the Power Tool to run unattended. Always switch the Power Tool off and unplug from the mains when
not in use. Do not leave the power tool until it has come to a complete stop. - DO NOT LEAVE THE POWER TOOL
UNATTENDED IN THE PRESENCE OF CHILDREN OR ANIMALS.
• Keep children far from the area where you are working and DO NOT allow children to drag / pull the power cable, this
could cause serious injury.
• Do not soak / immerse the Power Tool in water or any other liquids. Do not direct the power tool at any persons or
animals. Serious injury will result.
• Do not put cleaning detergents, vinegar or other cleansers on to the power tool.
• Do not use chemically processed water.
• Check the power cable is in good condition before each use.
• Do not use other high-power electrical Power Tools on the same circuit, this will help prevent overload.
• Always place and use the Power Tool on a stable, level and horizontal surface.
• The Power Tool is for indoor use only
• Disconnect the power tool from the mains switch in the locked off position before making any adjustments, changing
accessories, or storing the power tool. Such preventative safety measures reduce the risk of starting the power tool
accidentally.