Blaupunkt MS2000 Manual Del Usuario página 5

OPERATION
SWITCHING ON THE SANDER
When you are ready to start sanding press the switch to (1), on position to stop press to (o), off position.
Remember to empty the collection bag regularly.
WARNING!
When sanding do not use excessive force or pressure this will
reduce the life of the pad
USE AND CARE
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for your application.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
• Disconnect the plug from the power source to the power tool before making any adjustment, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. lf damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools. lt is essential to keep the tool clean, remove dust or debris after each use, pay particular
attention to the ventilation slots. Clean the housing with a soft cloth moistened with soapy water, do not use solvents
such as; Petrol, Alcohol ammonia, etc...
• AII other servicing which requires break-down of the product should be carried out by a qualified person
or returned to Blaupunkt.
• Use the power tools, accessories and tool bits etc., in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation