Appendix I
Introduction of electronic drain valve (optional)
Product introduction: The function of the electronic drain valve is to remove the condensate from the air compressor, cooler, air/water
separator, refrigerated dryer and air filter in a timely (timed) manner. The condensate drain interval can be adjusted from 0.5 to 45min, and
the drain time can be adjusted from 0.5 to 10sec.
Product structure: The electronic drain gate consists of electromagnetic gate, timer and junction box
Technical data Timer
Interval
Drain time
Manual test button
Supply voltage
Current consumption
Ambient temperature
IP rating
Casing material
Electrical connection
Indicator
Solenoid valve
In/out port
Operating pressure
Ambient temperature
Medium temperature
Valve body
Insulation grade
IP rating
Supply voltage
Voltage range
Installed anywhere
Note: The contents of this Appendix are for reference only. The specific product specifications and models as well as the technical data
involved may be different, which does not affect the normal use.
AE5881/AE5882/AE5883
Type
中文
EN
DE
Adjustable from 0.5 to 45min
Adjustable from 0.5 to 10sec
Yes
AC/DC 24V-220V-380V±10%
Max. 4mA
-40℃ to +50℃
IP65NEMA4
Flame retardant ABS plastic
DIN43650A ISO4400/6952
Green indicates opening, red closing
2/2 direct-acting valve
1/4", 1/2" internal thread
1.6Mpa, 4.0Mpa, 8.0MPa
2℃ /55℃
90℃
Forged brass, diameter 4.5mm (2.0mm for high pressure)
Thermal resistance: H grade (200°C)
IP65
24VDC, 220VAC, 380VAC, used in combination with the correct coil
±10%
Yes
RU
KO
PT
JA
ES
41