Safety Instructions - MAGLOGIX MX-750-HL Manual De Instrucciones

Dear customer,
Thank you for purchasing a Maglogix
device for the first time and keep them along with the enclosed Product Control Card for later reference.

Safety Instructions

Serious accidents with fatal physical injuries can occur when using extremely strong magnetic clamps if they are
improperly used and/or maintained. Please observe all safety instructions in this operation manual and contact the
manufacturer if you have any questions.
Always...

activate the Hand Lifter completely

activate the Hand Lifter on metallic, ferromagnetic materials

use the entire magnetic contact area for lifting

lift on plane surfaces

check the magnetic holding force by shaking after picking up the load

clean the magnetic contact area and keep it clear of dirt, chips and welding spatter

set the Hand Lifter down gently to prevent damage to the magnetic contact area

check the hazard area when pivoting the load

respect the stated maximum load before pivoting

inspect the magnetic surface and the entire Hand Lifter for damage

follow the instructions in this operation manual

instruct new operators in the safe use of switchable magnetic tools

respect local, country-specific guidelines

store in a dry place
Never...

lift round or arched objects

exceed the stated maximum load

lift loads over people

lift more than one work piece at a time

switch the Hand Lifter off before setting down the load safely

allow the load to sway or bring to a sharp and immediate stop

lift loads exceeding the recommended dimensions

lift loads with cavities, cut-out openings or drilled holes

modify the Hand Lifter or remove operating labels

use the Hand Lifter if damaged or missing parts

strain the underside of the magnet through heavy impact or blows

position yourself beneath the lifted load

leave the load hanging unattended

use the Hand Lifter without having been properly instructed

use if you have not read and understood these operating instructions completely

use the Hand Lifter to support, lift or transport persons

operate the Hand Lifter in temperatures higher than 140°F (60°C)

expose to corrosive substances
People with cardiac pacemakers or other medical appliances should not use this Hand Lifter
until they have consulted with their physician.
®
product. Please read these operating instructions closely before using your
3